News

Centrifugal pump Wilo MHI 202-1/E/3-400-50-2 - high-pressure, horizontal, multi-chamber pump. The pump is mainly used for water supply and pressure boosting systems, industrial recirculation systems, irrigation and fire extinguishing systems, process and...

The Flygt N 3102 wastewater pumps with Adaptive N™ technology are perfect in their operation. Two impeller options are available - hardened gray cast iron for typical applications or Hard Iron™ for abrasive and corrosive media. Thanks to mechanical...

In vacuum pumps of the PW, DW type from the Polish manufacturer Hydro-Vacuum, two-sided shaft seals of the following types are used: No execution e1 e2 e3 e4 Type of seal (Seal Type)...

Pompetravaini TCD 40-200/2-R/A3-SP are single-stage closed impeller centrifugal pumps designed specifically to handle liquids up to 320˚C. The heat from the product is blocked by a special "thermal barrier" chamber located between the pump casing and the...

Mechanical seals for GEA Euro Hygia l, Contra l, HYGIANA I, Durietta 0, I, SIPLA 3.1 pumps Shaft diameter: 19 mmSeal type: mechanical, single, with an open conical spring. SKU Designation...

You need to purchase a mechanical seal for a hot oil pump with a temperature of 90 2 217 3 300 3 350°C etc? Receiving such requests, our engineers are constantly faced with customers' lack of understanding of the principles of operation of centrifugal...

You will need a caliper to take seal measurements. A mechanical seal usually consists of two parts: Part with spring (movable), mounted on the shaft. Fixed ring, which is taken out of the pump housing (they often forget to pull it out,...

Multi-stage vertical pump Speroni VS 16-8 KW 7.5 with a capacity of 7.5 kW and a capacity of 8-22 m3/h. The feed height of this model is 110 - 70 meters. This pump is used for water supply, pressure raising, filtration, irrigation, heating, cooling and air...