Mechanical shaft seal R-H12N 14, CAR/SIC, EPDM, 304, G9
Mechanical shaft seal R-H12N 14, CAR/SIC, EPDM, 304, G9
Mechanical shaft seal R-H12N 14, CAR/SIC, EPDM, 304, G9
Brand:
BTS EngineeringCharacteristics
Producer:
BTS Engineering
Pressure:
2.5 MPa
Operating temperature:
-40°C +220°C
Rotation velocity:
15 m/s
Seal type:
R-H12N
Outer diameter of the fixed ring, mm:
25
Stationary and rotating face:
CAR/SIC
See all
Categories
Favorite
Compare
Products from the same category
Mechanical seal for pump Caprari, Pentax, Rosenbauer R-H12N 35, SIC/SIC, VITON, 304, G9
Pre-order only
$173
$182
-5%
Mechanical shaft seal R-H12N 12, CAR/SIC, EPDM, 304, G9 type BURGMANN H12N/H17GN, AESSEAL T01DB, T01DBU
Pre-order only
$47
$50
-6%
Mechanical seal R-H12N 16, CAR/SIC, EPDM, 304, G9
Pre-order only
$62
$65
-5%
Mechanical shaft seal R-H12N 18, CAR/SIC, EPDM, 304, G9
Pre-order only
$70
$74
-5%
Mechanical shaft seal R-H12N 20, CAR/SIC, EPDM, 304, G9
Pre-order only
$78
$82
-5%
Mechanical seal R-H12N 80, CAR/SIC, EPDM, 304, G9
Pre-order only
$328
$346
-5%
Exchange or returnWe will return or exchange for another product
Fast shippingWe will pick up and send promptly
Warranty and qualityGuaranteed return of goods within 10 days
On-line payment on the sitePayment is made by bank cardsFeatures Mechanical shaft seal R-H12N 14, CAR/SIC, EPDM, 304, G9
Producer | BTS Engineering |
Pressure | 2.5 MPa |
Operating temperature | -40°C +220°C |
Rotation velocity | 15 m/s |
Seal type | R-H12N |
Outer diameter of the fixed ring, mm | 25 |
Stationary and rotating face | CAR/SIC |
Material of metal part | AISI 304 stainless steel |
Rubber type | EPDM |
Shaft diameter | 14 |
Type of conta-ring | G9 |
Application | KSB, Pentax |
Analogue for | Burgmann H12N/H17GN, AESSEAL T01DBU, AESSEAL T01DB |
Gross weight, kg | 0.1 |
Length of transport packing, cm | 5,5 |
Width of transport packing, cm | 5 |
Height of transport packing, cm | 5 |
Description Mechanical shaft seal R-H12N 14, CAR/SIC, EPDM, 304, G9
Single mechanical seal, unloaded, with conical spring R-H12N for stepped shafts is used at temperatures from -40 to + 220°C, with pressure up to 2.5 MPa and speed up to 15 m/sec. Depends on the direction of rotation of the shaft. Used mainly in chemical pumps and water pumps. Analog: Burgmann H12N / H12GN (with hot-pressed moving ring), AESSEAL T01DBU / T01DB, Hecker HN430N. Mechanical seal for pump Wilo, K, KM, X, AH, AHP, AH, Calpeda, DAB, Ebara, Grundfos, for pump KSB, Allweiler, SALMSON, ACD Cryo, Flygt, IMP Pumps, LOWARA, PENTAX, Foras, Fristam, for pump SPERONI, ZENIT, Inoxpa, JL, Johnson pump, KOLMEKS, Pedrollo, SAER, Vulcan, WQ, WQK, for pumps Tuchenhagen, ALFA LAVAL, Donjoy, Mission Magnum.
Mechanical shaft seal R-H12N 14, CAR/SIC, EPDM, 304, G9 reviews
Help in selection
+38 067 360-71-01
Selection of mechanical seals
+38 095 656-37-57
Pump selection
If you have any questions when placing an order, or need help choosing a product, please contact the specified contacts.