Mechanical seal for pump shaft KSB R-MG1S6 28, CAR/SIC, EPDM, 304
Mechanical seal for pump shaft KSB R-MG1S6 28, CAR/SIC, EPDM, 304
Mechanical seal for pump shaft KSB R-MG1S6 28, CAR/SIC, EPDM, 304
Brand:
BTS EngineeringCharacteristics
Producer:
BTS Engineering
Pressure:
1,6 mPa
Operating temperature:
-20°C + 140°C
Rotation velocity:
10 m/s
Seal type:
R-MG1S6
Outer diameter of the fixed ring, mm:
43
Stationary and rotating face:
CAR/SIC
See all
Documentation
Categories
Favorite
Compare
Products from the same category
Mechanical seal for pump shaft KSB R-MG1S6 15, SIC/SIC, VITON, 304
Pre-order only
$31
$32
-3%
Mechanical seal for pump shaft KSB R-MG1S6 16, SIC/SIC, VITON, 304
Pre-order only
$32
$33
-3%
Mechanical seal for pump shaft KSB R-MG1S6 22, SIC/SIC, VITON, 304
Pre-order only
$44
$47
-6%
Mechanical seal for pump shaft KSB R-MG1S6 28, SIC/SIC, VITON, 304
Pre-order only
$56
$59
-5%
Mechanical seal for pump shaft KSB R-MG1S6 38, SIC/SIC, VITON, 304
Pre-order only
$76
$80
-5%
Mechanical seal for pump shaft KSB R-MG1S6 48, SIC/SIC, VITON, 304
Pre-order only
$153
$161
-5%
Exchange or returnWe will return or exchange for another product
Fast shippingWe will pick up and send promptly
Warranty and qualityGuaranteed return of goods within 10 days
On-line payment on the sitePayment is made by bank cardsFeatures Mechanical seal for pump shaft KSB R-MG1S6 28, CAR/SIC, EPDM, 304
Producer | BTS Engineering |
Pressure | 1,6 mPa |
Operating temperature | -20°C + 140°C |
Rotation velocity | 10 m/s |
Seal type | R-MG1S6 |
Outer diameter of the fixed ring, mm | 43 |
Stationary and rotating face | CAR/SIC |
Material of metal part | AISI 304 stainless steel |
Rubber type | EPDM |
Shaft diameter | 28 |
Application | KSB |
Analogue for | Vulcan 192K, KSB NU028, Flowserve KZN, Burgmann MG1S6, AESSEAL B02K |
Gross weight, kg | 0.1 |
Length of transport packing, cm | 5,5 |
Width of transport packing, cm | 5 |
Height of transport packing, cm | 5 |
Description Mechanical seal for pump shaft KSB R-MG1S6 28, CAR/SIC, EPDM, 304
Mechanical seal for pump shaft KSB R-MG1S6 with central spring, bellows type, independent of the direction of rotation of the shaft. For internal location and operation in low-viscosity liquids with a small content of abrasives. Standards EN 12756. Used in KSB pumps. Type: Burgmann MG1S6, KSB NU028, DIN KSB-ZN118, NU028SO-1 ZN1181, MG1S6 / 28-G61, AESSEAL B02K, Flowserve KZN, Vulcan 192K. Temperature: -20 ° ~140 ° Pressure: ≤1.6 MPa Speed: ≤10 m / sec Material • Rotating ring: CAR / SIC • Stationary ring: SIC. • Bellows: NBR / EPDM / VITON. • Spring: SS304 / SS316. • Metal parts: SS304 / SS316
Documentation Mechanical seal for pump shaft KSB R-MG1S6 28, CAR/SIC, EPDM, 304
Download instructions, catalog for Mechanical seal for pump shaft KSB R-MG1S6 28, CAR/SIC, EPDM, 304
Mechanical seal for pump shaft KSB R-MG1S6 28, CAR/SIC, EPDM, 304 reviews
Help in selection
+38 067 360-71-01
Selection of mechanical seals
+38 095 656-37-57
Pump selection
If you have any questions when placing an order, or need help choosing a product, please contact the specified contacts.