Circulation pump Grundfos UPS 25-40 180



Brand:
GRUNDFOS0 Comment
Characteristics
Output pipe diameter:
G1 1/2
Producer:
GRUNDFOS
Housing material:
Сast iron
Nom.head, m:
1.67
Power supply:
1х220 V, 50 Hz
Max. head, m:
3.8
Feed height, m:
1.67
See all
Categories
Favorite
Compare

Products from the same category

Pre-order only
$3,439.04
Also buy with this product




Features Circulation pump Grundfos UPS 25-40 180
Output pipe diameter | G1 1/2 |
Producer | GRUNDFOS |
Housing material | Сast iron |
Nom.head, m | 1.67 |
Power supply | 1х220 V, 50 Hz |
Max. head, m | 3.8 |
Feed height, m | 1.67 |
Nom.flow rate, m3/h | 2.03 |
Power capacity, kW | 0,045 |
Protection | IP44 |
Pump capacity, cu.m/hour | 2.03 |
Explosion protection | No |
Max.temperature, C | 110 |
Pressure, bar | 10 |
Frequency control | no |
Input pipe diameter | G1 1/2 |
Serial number of the pump | UPS |
Country of Origin | Denmark |
PumpType | with wet rotor |
Drive Type | electric |
Installation Type | horizontal |
Weight, kg | 2,6 |
Description Circulation pump Grundfos UPS 25-40 180
The circulation pump for household heating systems Grundfos UPS 25-40 is intended for use in heating and hot water supply systems, as well as for hot water supply in private houses.
The pump is equipped with an electric motor with a wet rotor and a protected stator, without packing seals, with two sealing rings. The bearings are lubricated by the pumped liquid.
Characteristics of the pump:
- ceramic shaft and radial bearings;
- graphite axial bearing;
- the rotor sleeve and support bearing are made of stainless steel;
- corrosion-resistant impeller, Composite;
- the pump body is made of cast iron;
- 1-phase electric motor that does not require additional protection.
Circulation pump Grundfos UPS 25-40 180 reviews

Help in selection
+38 067 360-71-01
Selection of mechanical seals
+38 095 656-37-57
Pump selection
If you have any questions when placing an order, or need help choosing a product, please contact the specified contacts.