WILO Varios PICO-STG 15/1-7 circulation pump with electronic controller
Brand:
WiloCharacteristics
Output pipe diameter:
G1
Producer:
Wilo
Housing material:
Сast iron
Power supply:
1х220 V, 50 Hz
Max. head, m:
6.5
Feed height, m:
6.5
Power capacity, kW:
0,038
See all
Categories
Favorite
Compare
Products from the same category
Also buy with this product
Exchange or returnWe will return or exchange for another product
Fast shippingWe will pick up and send promptly
Warranty and qualityGuaranteed return of goods within 10 days
On-line payment on the sitePayment is made by bank cards
Features WILO Varios PICO-STG 15/1-7 circulation pump with electronic controller
Output pipe diameter | G1 |
Producer | Wilo |
Housing material | Сast iron |
Power supply | 1х220 V, 50 Hz |
Max. head, m | 6.5 |
Feed height, m | 6.5 |
Power capacity, kW | 0,038 |
Protection | IPХ4D |
Pump capacity, cu.m/hour | 3.8 |
Max.flow rate, m3/h | 3.8 |
Max.temperature, C | 95 |
Shaft material | нержавіюча сталь |
Pressure, bar | 10 |
Installed length mm | 180 |
Frequency control | yes |
Input pipe diameter | G1 |
Serial number of the pump | Varios PICO-STG |
PumpType | with wet rotor |
Drive Type | electric |
Installation Type | vertical |
Type of configuration | with engine |
Weight, kg | 1,6 |
Description WILO Varios PICO-STG 15/1-7 circulation pump with electronic controller
Wilo-Varios PICO-STG сirculation pump with wet rotor, with threaded connection, resistant to current block synchronous motor according to ECM technology and integrated electronic power control unit for smooth adjustment of the pressure drop. Can be used for all heating and air conditioning systems, as well as for solar and geothermal plants.
Pre-selection control methods for optimal load setting:
- Constant pressure drop (Δp-c), 3 predefined characteristic curves;
- Changeable pressure drop (Δp-v), 3 predefined characteristic curves;
- Constant number of revolutions (3 degrees of number of revolutions);
- External control via iPWM GT signal (heating/geothermal energy) or iPWM ST (solar power);
- Sync function (manual programming mode) for reprogramming the pump when replacing;
- Manual venting function for the rotor chamber ventilation;
- Manual restart;
- LED indication;
- Indication of the selected control method and characteristic curve;
- Status indication for venting and manual restart;
- LED coding during Sync function;
- Malfunctioning or failure indication;
- Built-in engine protection;
- Auto unlock function;
- Electric plug-in cable with 3-pole plug connection and with Wilo-Connector connection;
- PWM connection;
- Pump casing with Cataphoresis coating
WILO Varios PICO-STG 15/1-7 circulation pump with electronic controller reviews
Help in selection
+38 067 360-71-01
Selection of mechanical seals
+38 095 656-37-57
Pump selection
If you have any questions when placing an order, or need help choosing a product, please contact the specified contacts.