Horizontal centrifugal pump with mechanical seals DR 030 PP, 3 kW
Brand:
FLUIMACCharacteristics
Output pipe diameter:
G1 1/2
Producer:
FLUIMAC
Power supply:
3х380 V, 50 Hz
Max.head, meter of water column:
20
Max.viscosity, cPs:
500
Model:
DR 030
Power capacity, kW:
3
See all
Documentation
Categories
Favorite
Compare
Products from the same category
Also buy with this product
Exchange or returnWe will return or exchange for another product
Fast shippingWe will pick up and send promptly
Warranty and qualityGuaranteed return of goods within 10 days
On-line payment on the sitePayment is made by bank cards
Features Horizontal centrifugal pump with mechanical seals DR 030 PP, 3 kW
Output pipe diameter | G1 1/2 |
Producer | FLUIMAC |
Power supply | 3х380 V, 50 Hz |
Max.head, meter of water column | 20 |
Max.viscosity, cPs | 500 |
Model | DR 030 |
Power capacity, kW | 3 |
Pump capacity, cu.m/hour | 30 |
Max.flow rate, m3/h | 30 |
Max.temperature, C | 65 |
Input pipe diameter | G2 |
Material | PP |
Serial number of the pump | DRAGON |
Country of Origin | Italy |
Availability of spare parts | yes |
Warranty, months | 12 |
Description Horizontal centrifugal pump with mechanical seals DR 030 PP, 3 kW
DRAGON PLASTIC horizontal centrifugal pumps are high-performance pumps that are driven by a direct-drive electric motor for rapid pumping and drainage of liquids at a flow rate of 6 to 40 m3 / h. The special semi-open design of the impeller allows you to continuously pump even dirty liquids with a relative viscosity of up to 500 cps. and small suspended solids. DRAGON centrifugal pumps have a strong pump housing and a lamp for connecting the motor and checking the mechanical seal. The semi-open impeller is mounted on the pump shaft, which is integral with the drive shaft of the motor. The mechanical seal is located on the back part of impeller.
THE MAIN CHARACTERISTICS
The housing and impeller are made of polypropylene and PVDF
O-ring with EPDM and VITON with
one mechanicals eal
The maximal head of delivery is 25 mm.
The maximal consumption: 40 m3/h
Temperature: from -20 ° C to + 95°C
The maximal viscosity: 500 CPS
Electric motors from 0.37 kW to 5.5 kW
Specific weight up to 1,40
Documentation Horizontal centrifugal pump with mechanical seals DR 030 PP, 3 kW
Download instructions, catalog for Horizontal centrifugal pump with mechanical seals DR 030 PP, 3 kW
Horizontal centrifugal pump with mechanical seals DR 030 PP, 3 kW reviews
Help in selection
+38 067 360-71-01
Selection of mechanical seals
+38 095 656-37-57
Pump selection
If you have any questions when placing an order, or need help choosing a product, please contact the specified contacts.