Pump unit for thermal oil BTKF-K 32-160, 7.5 kW (3000)
Brand:
ERDUROCharacteristics
Output pipe diameter:
DN32
Producer:
ERDURO
Max. head, m:
48
Rate of turn, rpm:
3 000
Feed height, m:
45
Nom.flow rate, m3/h:
30
Power capacity, kW:
7,5
See all
Documentation
Favorite
Compare
Products from the same category
Also buy with this product
Exchange or returnWe will return or exchange for another product
Fast shippingWe will pick up and send promptly
Warranty and qualityGuaranteed return of goods within 10 days
On-line payment on the sitePayment is made by bank cards
Features Pump unit for thermal oil BTKF-K 32-160, 7.5 kW (3000)
Output pipe diameter | DN32 |
Producer | ERDURO |
Max. head, m | 48 |
Rate of turn, rpm | 3 000 |
Feed height, m | 45 |
Nom.flow rate, m3/h | 30 |
Power capacity, kW | 7,5 |
Protection | IP55 |
Pump capacity, cu.m/hour | 38 |
Explosion protection | No |
Seal | Mechanical Seal, Eagle Burgmann |
Max.flow rate, m3/h | 38 |
Max.temperature, C | 350 |
Input pipe diameter | DN50 |
Material | cast iron |
Serial number of the pump | BTKF-K |
Country of Origin | Turkey |
PumpType | console |
Drive Type | electric |
Installation Type | horizontal |
Type of configuration | with engine |
Warranty, months | 12 |
Application | thermal oils, superheated water |
Analogue for | KSB, FLOWSERVE, Pompetravaini TCD, ALLWEILER, SIHI, WILO |
Description Pump unit for thermal oil BTKF-K 32-160, 7.5 kW (3000)
The hot oil pump BTKF-K is designed for pumping high-temperature liquids, oil 350°C. A pump for heating bitumen, a pump for woodworking factories for the production of products. The pumps are equipped with impellers of three standard sizes in diameter (with trimming), which allows you to more accurately select the pump in terms of pressure and power on the shaft. The pump for the hot coolant is an air-cooled centrifugal pump with a cast radiator to relieve the thermal load of the shaft chamber and installed end seals. The pump and the electric motor are connected using a coupling. This gives advantages during dismantling. The size of the pump corresponds to the standard TS EN 733. The inlet and outlet dimensions of the flanges correspond to ISO 7005-2 / PN16. The pump is equipped with a mechanical seal made of materials resistant to high temperatures. If it is necessary to replace the impeller, bearings or seals, the pump is easily disassembled. Purpose: pump for superheated liquid, oil, other clean products with a temperature of up to 350°C. Application: - chemical and petrochemical plants, paper factories, sugar factories, in the production of food products, bakeries for the production of plastic, rubber and synthetic fiber products, kitchen and heating stoves, textile and leather industries, metallurgy, paint preparation, bitumen heating for road construction, Wood processing industry, production of plates for furniture, pasting, etc., for technological heat exchangers for transfer and heating of liquids.
Documentation Pump unit for thermal oil BTKF-K 32-160, 7.5 kW (3000)
Download instructions, catalog for Pump unit for thermal oil BTKF-K 32-160, 7.5 kW (3000)
Video Pump unit for thermal oil BTKF-K 32-160, 7.5 kW (3000)
Pump unit for thermal oil BTKF-K 32-160, 7.5 kW (3000) reviews
Help in selection
+38 067 360-71-01
Selection of mechanical seals
+38 095 656-37-57
Pump selection
If you have any questions when placing an order, or need help choosing a product, please contact the specified contacts.