Centrifugal pump 3MHS/I 50-160/5.5, 380V

Ebara centrifugal pumps with flanges in accordance with the EN 733 standard are made of stainless steel AISI 304 (AISI 316). Application: water supply systems; pumping moderately aggressive liquids; filtration; water treatment; industrial sinks; increased pressure; heating and air conditioning; cooling and refrigeration systems; irrigation. Technical features: Strong hydraulic design. Suitable for pumping many liquids (version made of AISI 304 or AISI 316). Thanks to the special spiral chamber, the efficiency of the pump increases. The standard pump body is made of AISI 304. The pump body is fastened with screws made of AISI 304. Compact dimensions. A wide range of pumps equipped with 2 and 4 pumps pole motors. Manufactured to ISO EN 733. The "split-back" design allows the motor/impeller assembly to be separated, leaving the housing in place. DIN 24960 standard mechanical seal. IEC motor (3S - 3P). Special motors: explosion-proof, highly efficient EFF 1, low noise, with integrated VMA inverter. A mechanical seal is installed to order, which will satisfy your needs. Specification: Productivity up to 132 m3/h. Delivery height up to 72 m. Maximum pressure: 1 MPa. Temperature of the pumped liquid: -10°C ÷ 100°C. according to the standard, -10°C ÷ 110°C for version H. Pump housing, housing cover, impeller and shaft in stainless steel AISI 304 (series 3), with AISI 316L (series 3L). Graphite/ceramic/NBR mechanical seal for standard version (3 series), SiC/SiC/FPM (3L series), graphite/ceramic/FPM mechanical seal for H version, SiC/SiC/FPM mechanical seal for HS version , SiC/graphite/FPM mechanical seal for E version. Technical data: Asynchronous 2- and 4-pole motor. Insulation class F. Degree of protection IP55. Single-phase 220V, 50 Hz, three-phase 380V, 50 Hz. Protection against thermal overload must be provided by the consumer.