Controller eControl (pH, Rx, Cl, CD) for 1 parameter
Brand:
ETATRON D.S.Characteristics
Producer:
ETATRON D.S.
Power supply:
1х220 V, 50 Hz
Control:
Microprocessing
Measuring parameters:
1
Measuring parameters:
pH-Rx-Cl-CD
Serial number of the controller:
eCONTROL
Documentation
Categories
Favorite
Compare
Products from the same category
Also buy with this product
Exchange or returnWe will return or exchange for another product
Fast shippingWe will pick up and send promptly
Warranty and qualityGuaranteed return of goods within 10 days
On-line payment on the sitePayment is made by bank cards
Features Controller eControl (pH, Rx, Cl, CD) for 1 parameter
Producer | ETATRON D.S. |
Power supply | 1х220 V, 50 Hz |
Control | Microprocessing |
Measuring parameters | 1 |
Measuring parameters | pH-Rx-Cl-CD |
Serial number of the controller | eCONTROL |
Description Controller eControl (pH, Rx, Cl, CD) for 1 parameter
• Microprocessor control.
• informative LCD display with backlight
• Measurement ranges:
0-14 pH;
-1000 +1400 mV Rx;
chlorine: 0-2 mg/l, 0-20 mg/l, 0-200 mg/l;
ppm: 0-2 ppm, 0-20 ppm, 0-200 ppm;
0-100°С.
• Setting 2 independent setpoint points on the measured parameter
• Control dosing modes: constant ON/OFF with hysteresis installation or PROP proportional.
• Choice of direction of dosing mode: direct or reverse
• Setting the start delay time for metering pumps
• 2 independent proportional ON / OFF outputs (proximity relay) with PWM mode
• Support for PT100 temperature sensor.
• Manual (25 ° C) or automatic temperature compensation (when connecting a PT100 temperature sensor)
• Alarm MAX. reagent concentration (optional)
• Alarm MIN. reagent concentration (optional)
• Alarm for continuous dosing time and failure to reach the Set Point (optional)
• ON / OFF output (proximity relay) for alarm (optional)
• Output 4-20 mA (optional)
• Galvanically isolated outputs
Documentation Controller eControl (pH, Rx, Cl, CD) for 1 parameter
Download instructions, catalog for Controller eControl (pH, Rx, Cl, CD) for 1 parameter
Controller eControl (pH, Rx, Cl, CD) for 1 parameter reviews
Help in selection
+38 067 360-71-01
Selection of mechanical seals
+38 095 656-37-57
Pump selection
If you have any questions when placing an order, or need help choosing a product, please contact the specified contacts.