Controller eSelect B4 (pH, Rx, Cl, CD) 100-250V, for 3 parameters
Brand:
ETATRON D.S.Characteristics
Producer:
ETATRON D.S.
Power supply:
1х220 V, 50 Hz
Control:
Microprocessing
Measuring parameters:
3
Measuring parameters:
pH-Rx-Cl-CD
Serial number of the controller:
eSELECT
Documentation
Categories
Favorite
Compare
Products from the same category
Also buy with this product
Exchange or returnWe will return or exchange for another product
Fast shippingWe will pick up and send promptly
Warranty and qualityGuaranteed return of goods within 10 days
On-line payment on the sitePayment is made by bank cards
Features Controller eSelect B4 (pH, Rx, Cl, CD) 100-250V, for 3 parameters
Producer | ETATRON D.S. |
Power supply | 1х220 V, 50 Hz |
Control | Microprocessing |
Measuring parameters | 3 |
Measuring parameters | pH-Rx-Cl-CD |
Serial number of the controller | eSELECT |
Description Controller eSelect B4 (pH, Rx, Cl, CD) 100-250V, for 3 parameters
Liquid analyzer (controller) eSELECT B4 for 3 parameters pH, Rx, Cl, CD.
• Microprocessor control: CPU: Processore 32 bit 80Mhz - 512Kb Flash – 128Kb Ram – 1Mb Eeprom.
• Interface: RS485, protocol: MODBUS, TCP/IP.
• Informative color touch screen Color Touch 7 '' LCD 800 x 480 px.
• 9 independent outputs ON-OFF (contactless relay).
• 2 independent outputs ON / OFF (contactless relay) for activating actuators by timer.
• 6 galvanically isolated 4-20 mA outputs.
• 3 TTL outputs (0-999 pulses).
• 7 service inputs, including an input from a flow meter.
• 1 USB port for software update and data upload.
• 1 RJ45 Ethernet (LAN) for network connection.
• RS485 output.
• Electronic journal of measurements.
• Administrator password
• Time Calendar. Timer.
• Measurement range: 0 – 14 рН; –1000 +1400 mV;
chlorine: 0-2 mg/l, 0-20 mg/l, 0-200 mg/l;
ppm: 0 – 2 ppm, 0 – 20 ppm, 0 – 200 ppm; 0-100°С.
• Setting 2 independent setpoint points on the measured parameter
• Control dosing modes: constant ON/OFF with hysteresis installation or PROP proportional.
• Setting the start delay time for metering pumps
• Support for PT100 temperature sensor.
• Manual (25 ° C) or automatic temperature compensation (when connecting a PT100 temperature sensor)
• Alarm MAX. reagent concentration.
• Alarm MIN. reagent concentration.
• Alarm of reagent level probe and flow sensor.
• Support for level and flow sensors (not included).
• Universal input voltage: 100-250V AC 50Hz. (12V DC).
• Class of dust and moisture protection: IP65.
• Wall mount.
Documentation Controller eSelect B4 (pH, Rx, Cl, CD) 100-250V, for 3 parameters
Download instructions, catalog for Controller eSelect B4 (pH, Rx, Cl, CD) 100-250V, for 3 parameters
Controller eSelect B4 (pH, Rx, Cl, CD) 100-250V, for 3 parameters reviews
Help in selection
+38 067 360-71-01
Selection of mechanical seals
+38 095 656-37-57
Pump selection
If you have any questions when placing an order, or need help choosing a product, please contact the specified contacts.