Chlorine dioxide dosing and control system EMEC LOTUS MAXI 80-1000 g/h, 8-4 bar, for water disinfection

The LOTUS MAXI system is used in all cases where large-scale production of chlorine dioxide is required, for example in large water treatment plants. Chlorine dioxide is produced from diluted chemicals: hydrochloric acid (HCl 9%) and sodium chlorite (NaClO2 7.5%), which react in a reaction chamber to form the required chlorine dioxide. Chlorine dioxide is not stored, so there is no chlorine dioxide gas or concentrated solutions outside the application process. The chlorine dioxide produced by the LOTUS MAXI is proportional to the circulating water flow or based on a set value, after which it is dosed into the water flow. Features: - Instantaneous production of ClO 2. - ClO 2 dosing in proportional mode. - Input for flow control (flow alarm). - Level control in the tank (level alarm). - Input for water meter. - Input for standby mode. - Real-time production data. - Monitoring of SEFL pumps and flow sensors. - Permanent data storage with system data log (in the "Log" menu). - Maintenance interval. - LOTUS control unit. - HCl (red) and NaClO2 (blue) dosing pumps. - Dilution water pump (gray). - 3 SEFL flow sensors as a safety measure. - Multifunctional valve MFKT/V as pressure, safety, anti-siphon and drain valve. - PVC reaction chamber. - IP65 (NEMA4x) protection of the LOTUS control unit. - ENCODER wheel control. - Operating temperature: 0-45 °C (32-110 °F). - mA output. - ClO2 sensor readings (LOTUS MAX SVCL2 - LOTUS MAXI SVCL17). - Temperature sensor readings (sensor and accessories not included). - mV sensor readings (LOTUS MAXI ERH).