Diaphragm dosing pump PDM-D AA 158/8 400/3/50 0,25
Diaphragm dosing pump PDM-D AA 158/8 400/3/50 0,25
Diaphragm dosing pump PDM-D AA 158/8 400/3/50 0,25
Brand:
ETATRON D.S.Characteristics
Producer:
ETATRON D.S.
Diaphragm diameter, mm:
75
Control:
Manual
Diaphragm stroke per min.:
120
Model:
AA
Power capacity, kW:
0,25
Connection:
3/4" Gm
See all
Documentation
Favorite
Compare
Products from the same category
Diaphragm dosing pump PDM-D AA 79/12 400/3/50 0,25
Pre-order only
$1,749.56
Diaphragm dosing pump PDM-D AA 113/10 400/3/50 0,25
Pre-order only
$1,396.71
Diaphragm dosing pump PDM-D AA 135/10 400/3/50 0,25
Pre-order only
$1,749.56
Diaphragm dosing pump PDM-D AA 104/7,5 400/3/50 0,25
Pre-order only
$1,832.43
Diaphragm dosing pump PDM-D AA 150/7,5 400/3/50 0,25
Pre-order only
$2,296.22
Diaphragm dosing pump PDM-D AA 209/6 400/3/50 0,25
Pre-order only
$1,832.43
Also buy with this product
Exchange or returnWe will return or exchange for another product
Fast shippingWe will pick up and send promptly
Warranty and qualityGuaranteed return of goods within 10 days
On-line payment on the sitePayment is made by bank cardsFeatures Diaphragm dosing pump PDM-D AA 158/8 400/3/50 0,25
Producer | ETATRON D.S. |
Diaphragm diameter, mm | 75 |
Control | Manual |
Diaphragm stroke per min. | 120 |
Model | AA |
Power capacity, kW | 0,25 |
Connection | 3/4" Gm |
Explosion protection | No |
Flow rate, l/h | 158 |
Pressure, bar | 8 |
Pump body material | AISI 316L |
Material | AISI 316L |
Diaphragm stroke length, mm | 10 |
Serial number of the pump | D |
Country of Origin | Italy |
PumpType | membrane motor |
Drive Type | electric |
Availability of spare parts | yes |
Application | dosing of acids and alkalis, kebospuma, miniphoma, bukofouma, aluminum hydroxide, dosing of syrups, enzyme dosage, dosing of fruit concentrates, dosing of preservatives, flavor dosage, yeast dosage, dosing glaze additives, water dosing, essence dosage, antispumina, breviol, nitric acid, formalin |
Analogue for | FWT, Seko, ASeko, Injecta, Emec, AquaViva, Descon trol S |
Description Diaphragm dosing pump PDM-D AA 158/8 400/3/50 0,25
D-Series diaphragm (or diaphragm) chemical dosing pumps;
Configuration AA-pump head-H / St AISI 316L, membrane - PTFE (Teflon);
On request: AI, AP, BI, SA, SI;
Capacity: 56÷574 L / H, pressure: 2÷12 bar;
The pumps comply with CE standards;
The pump body is made of cast aluminum, protected by epoxy, anti-acid paint;
Protection class: IP55, insulation Class: F;
The pump capacity is regulated by a micrometer handle that controls the length of the piston stroke;
Maximum intake height: 3 meters;
The dosing pump is controlled by a vertically positioned motor;
The gearbox operates on the principle of idling (the piston is returned using a return spring);
Standard motor: 0.18 kW, 0.37 kW, 230 / 400V, 3 phase, 50 Hz;
Other types of engines are made on an additional order.
Documentation Diaphragm dosing pump PDM-D AA 158/8 400/3/50 0,25
Download instructions, catalog for Diaphragm dosing pump PDM-D AA 158/8 400/3/50 0,25
Diaphragm dosing pump PDM-D AA 158/8 400/3/50 0,25 reviews
Help in selection
+38 067 360-71-01
Selection of mechanical seals
+38 095 656-37-57
Pump selection
If you have any questions when placing an order, or need help choosing a product, please contact the specified contacts.