Bitumen pump G45*2-46/4/0.6/ C
Bitumen pump G45*2-46/4/0.6/ C
Brand:
BTS EngineeringCharacteristics
Output pipe diameter:
40 mm
Producer:
BTS Engineering
Power supply:
3х380 V, 50 Hz
Rate of turn, rpm:
1 450
Power capacity, kW:
2,2
Pump capacity, cu.m/hour:
6
Explosion protection:
No
See all
Categories
Favorite
Compare
Products from the same category
Gear pump for viscous products EMSE EDP 1002, 1 inch, 1 m3/h, 10 bar, 1.1 kW, 1000 rpm, carbon steel
Pre-order only
Price on request
Bitumen gear pump EMSE EDP-I 2 1/2 in., 25 m3/h, 3 bar, 4 kW, 500 rpm, 380 V, 50 Hz with internal gearing with heating jacket, reduction motor
Pre-order only
$5,804.10
EMSE EDP-I gear pump 4 inches, 54 m3/h, 8 bar, 22 kW, 400 rpm, 380V with internal gearing, with bypass
Pre-order only
$12,905.48
Bitumen pump G54*2-46/6/1.0/ C
Pre-order only
$5,814.75
Bitumen pump G80*2-46/4/0.6/ C
Pre-order only
$7,109.59
Bitumen pump G90*2-46/4/0.6/ C
Pre-order only
$7,589.42
Also buy with this product
Exchange or returnWe will return or exchange for another product
Fast shippingWe will pick up and send promptly
Warranty and qualityGuaranteed return of goods within 10 days
On-line payment on the sitePayment is made by bank cardsFeatures Bitumen pump G45*2-46/4/0.6/ C
Output pipe diameter | 40 mm |
Producer | BTS Engineering |
Power supply | 3х380 V, 50 Hz |
Rate of turn, rpm | 1 450 |
Power capacity, kW | 2,2 |
Pump capacity, cu.m/hour | 6 |
Explosion protection | No |
Nom.pressure, Mpa | 0,6 |
Max.temperature, C | 350 |
Input pipe diameter | 40 mm |
PumpType | gear type |
Drive Type | electric |
Installation Type | horizontal |
Application | lubricants, rubber, mineral oil, crude oil, liquid fuel, bitumen |
Description Bitumen pump G45*2-46/4/0.6/ C
Three-screw bitumen pump with heating jacket G45*2-46/4/0.6/C.
The pump consists of three synchronously rotating screws (one driving two driven), a housing and a heating jacket. The pump is driven by a standard asynchronous electric motor through an elastic coupling. This type of pump has stable performance, low noise, high pressure.
The pump can be used for pumping various liquids with a temperature of up to 350 ° C and a viscosity of up to 760 cSt. For example, liquid fuel, bitumen, crude oil, mineral oil, rubber, various lubricants;
They are used in the oil industry, mining, energy, shipbuilding, glass and rubber production. The housing with a heating jacket allows heating the pumped liquid to prevent its solidification.
Bitumen pump G45*2-46/4/0.6/ C reviews
Help in selection
+38 067 360-71-01
Selection of mechanical seals
+38 095 656-37-57
Pump selection
If you have any questions when placing an order, or need help choosing a product, please contact the specified contacts.