Gear pump for viscous products EMSE EDP 1100, DN150, 100 m3/h, 3 bar (30 metres), 22 kW, 1000 rpm, cast iron body
Brand:
EMSECharacteristics
Output pipe diameter:
DN150
Producer:
EMSE
Housing material:
cast iron GG 25
Rate of turn, rpm:
1 000
Power capacity, kW:
22
Pump capacity, m3/h:
100
Explosion protection:
No
See all
Documentation
Categories
Favorite
Compare

Products from the same category
Also buy with this product




Features Gear pump for viscous products EMSE EDP 1100, DN150, 100 m3/h, 3 bar (30 metres), 22 kW, 1000 rpm, cast iron body
Output pipe diameter | DN150 |
Producer | EMSE |
Housing material | cast iron GG 25 |
Rate of turn, rpm | 1 000 |
Power capacity, kW | 22 |
Pump capacity, m3/h | 100 |
Explosion protection | No |
Shaft material | AISI 420 |
Pressure, bar | 3 |
Gear meshing type | external |
Gear material | 8620 STEEL |
Input pipe diameter | DN150 |
Material | cast iron |
Country of Origin | Turkey |
PumpType | gear type |
Drive Type | electric |
Installation Type | horizontal |
Type of configuration | with engine |
Description Gear pump for viscous products EMSE EDP 1100, DN150, 100 m3/h, 3 bar (30 metres), 22 kW, 1000 rpm, cast iron body
EMSE gear pumps of the EDP series, depending on the material of the gear part (cast iron, stainless steel), can pump viscous liquids such as fuel oil, polyester components, caustic resin, oil, glue, mineral oil, gel, grease, chocolate, soap raw materials, glucose, quaternary esters, glycerin, rubber, wax, honey, molasses, oil and many other liquids.
The principle of operation: as a result of the rotation of the gears in constant engagement, a low and high pressure zone is formed. As a result, the fluid is drawn into the suction nozzle and, moving in the gap between the gear teeth and the housing, enters the discharge zone to the discharge nozzle.
Gear pumps are reversible and can operate in both directions. These pumps can be connected to a drive in a variety of ways. These include: direct connection to an electric motor via a coupling, connection via a gearbox, connection via a V-belt drive, connection to a variable speed drive. (This connection method allows the speed of rotation to be varied and thus the flow to be controlled.)
EDP pumps from model 1015 onwards are available with a casing with a heating jacket as standard. This feature allows for a wider range of process applications for pumping products that are prone to crystallisation at lower temperatures.
Documentation Gear pump for viscous products EMSE EDP 1100, DN150, 100 m3/h, 3 bar (30 metres), 22 kW, 1000 rpm, cast iron body
Download instructions, catalog for Gear pump for viscous products EMSE EDP 1100, DN150, 100 m3/h, 3 bar (30 metres), 22 kW, 1000 rpm, cast iron body
Gear pump for viscous products EMSE EDP 1100, DN150, 100 m3/h, 3 bar (30 metres), 22 kW, 1000 rpm, cast iron body reviews

Help in selection
+38 067 360-71-01
Selection of mechanical seals
+38 095 656-37-57
Pump selection
If you have any questions when placing an order, or need help choosing a product, please contact the specified contacts.