Gear pump for fuel oil EMSE EDP 1150, DN200, 150 m3/h, without motor
Brand:
EMSECharacteristics
Output pipe diameter:
DN200
Producer:
EMSE
Housing material:
Сast iron
Rate of turn, rpm:
950
Operating temperature:
-20°C +180°C
Pressure range, bar:
2-10
Power capacity, kW:
78
See all
Documentation
Categories
Favorite
Compare
Products from the same category
Also buy with this product
Exchange or returnWe will return or exchange for another product
Fast shippingWe will pick up and send promptly
Warranty and qualityGuaranteed return of goods within 10 days
On-line payment on the sitePayment is made by bank cards
Features Gear pump for fuel oil EMSE EDP 1150, DN200, 150 m3/h, without motor
Output pipe diameter | DN200 |
Producer | EMSE |
Housing material | Сast iron |
Rate of turn, rpm | 950 |
Operating temperature | -20°C +180°C |
Pressure range, bar | 2-10 |
Power capacity, kW | 78 |
Pump capacity, cu.m/hour | 150 |
Max.flow rate, m3/h | 150 |
Gear meshing type | external |
Input pipe diameter | DN200 |
Material | cast iron |
Serial number of the pump | EDP |
Country of Origin | Turkey |
PumpType | gear type |
Installation Type | horizontal |
Description Gear pump for fuel oil EMSE EDP 1150, DN200, 150 m3/h, without motor
EMSE gear pumps of the EDP series can pump viscous liquids such as fuel oil, polyester compounds, caustic resin, oil, glue, mineral oil, gel, grease, chocolate, soap raw materials, glucose, quaternary esters, glycerin, rubber, wax, honey, molasses, oil and many viscous liquids.
The principle of operation: the movement of the gears creates a vacuum. As a result of this vacuum, the liquid enters the pump. The fluid-filled gear cavities are transferred to the outlet with the discharge pressure, which is developed together with the movement of the gears. Gear pumps operate in both directions. These pumps can be connected to a drive in a variety of ways. These include: direct connection to the drive by means of a coupling, connection to a gearbox, connection by means of V-belts, connection to a variable speed drive. (This connection method makes it possible to
to change the speed and therefore control the flow). Design: with bypass, without bypass, with heat jacket (housing heat jacket available).
Documentation Gear pump for fuel oil EMSE EDP 1150, DN200, 150 m3/h, without motor
Download instructions, catalog for Gear pump for fuel oil EMSE EDP 1150, DN200, 150 m3/h, without motor
Gear pump for fuel oil EMSE EDP 1150, DN200, 150 m3/h, without motor reviews
Help in selection
+38 067 360-71-01
Selection of mechanical seals
+38 095 656-37-57
Pump selection
If you have any questions when placing an order, or need help choosing a product, please contact the specified contacts.