Internal gear pump for asphalt EMSE EDP-I 3 inch, 16,2-31,9 m3/h, without motor
Brand:
EMSECharacteristics
Output pipe diameter:
3"
Producer:
EMSE
Housing material:
Сast iron
Rate of turn, rpm:
400
Operating temperature:
-10°C +110°C
Power capacity, kW:
15
Pressure range, bar:
2-10
See all
Documentation
Categories
Favorite
Compare
Products from the same category
Also buy with this product
Exchange or returnWe will return or exchange for another product
Fast shippingWe will pick up and send promptly
Warranty and qualityGuaranteed return of goods within 10 days
On-line payment on the sitePayment is made by bank cards
Features Internal gear pump for asphalt EMSE EDP-I 3 inch, 16,2-31,9 m3/h, without motor
Output pipe diameter | 3" |
Producer | EMSE |
Housing material | Сast iron |
Rate of turn, rpm | 400 |
Operating temperature | -10°C +110°C |
Power capacity, kW | 15 |
Pressure range, bar | 2-10 |
Pump capacity, cu.m/hour | 31.9 |
Max.flow rate, m3/h | 31.9 |
Gear meshing type | internal |
Input pipe diameter | 3" |
Material | cast iron |
Serial number of the pump | EDP-I |
Country of Origin | Turkey |
PumpType | gear type |
Installation Type | horizontal |
Weight, kg | 135 |
Description Internal gear pump for asphalt EMSE EDP-I 3 inch, 16,2-31,9 m3/h, without motor
Thanks to their large pitch and tooth clearance, EMSE gear pumps of the EDP-I series can pump viscous liquids such as molasses, chocolate, asphalt, oil, petroleum products, paint, glue, vegetable oils, soap, fuels, pharmaceuticals, chemicals, food, plastics and rubber products and other highly viscous liquids up to a pressure of 14 -15 bar. Thanks to the volumetric flow, high pressure can be achieved even at low speeds.
Working principle: Internal gear pumps are used for pumping liquids with high viscosity. This type of pump consists of a drive gear on the outside and a driven gear in an eccentric position. Thanks to its simple design, it is a durable, easy-to-maintain pump. The drive gear (rotor) is connected to the motor and contacts the idler gear from the inside and drives it. In a positive displacement pump with internal gearing, the vacuum is created at the suction side by the expansion of the volume between the gears. The liquid that fills the pump casing is pressurised by the narrowing of the gap between the gears and moves towards the pump outlet.
The pump is available in various materials:
Casings: cast iron, ductile iron
Gears: ductile iron, steel
Shafts: steel
Bushing: bronze, graphite
Documentation Internal gear pump for asphalt EMSE EDP-I 3 inch, 16,2-31,9 m3/h, without motor
Download instructions, catalog for Internal gear pump for asphalt EMSE EDP-I 3 inch, 16,2-31,9 m3/h, without motor
Internal gear pump for asphalt EMSE EDP-I 3 inch, 16,2-31,9 m3/h, without motor reviews
Help in selection
+38 067 360-71-01
Selection of mechanical seals
+38 095 656-37-57
Pump selection
If you have any questions when placing an order, or need help choosing a product, please contact the specified contacts.