Speroni RX 2-4 multistage horizontal centrifugal pump
Brand:
SperoniCharacteristics
Output pipe diameter:
G1
Producer:
Speroni
Power supply:
3х380 V, 50 Hz
Max. head, m:
36
Feed height, m:
36
Power capacity, kW:
0,55
Pump capacity, cu.m/hour:
4.8
See all
Categories
Favorite
Compare
Products from the same category
Also buy with this product
Exchange or returnWe will return or exchange for another product
Fast shippingWe will pick up and send promptly
Warranty and qualityGuaranteed return of goods within 10 days
On-line payment on the sitePayment is made by bank cards
Features Speroni RX 2-4 multistage horizontal centrifugal pump
Output pipe diameter | G1 |
Producer | Speroni |
Power supply | 3х380 V, 50 Hz |
Max. head, m | 36 |
Feed height, m | 36 |
Power capacity, kW | 0,55 |
Pump capacity, cu.m/hour | 4.8 |
Max.flow rate, m3/h | 4.8 |
Nom.pressure, Mpa | 1 |
Max.temperature, C | 90 |
Material of flow channel | AISI 304 stainless steel |
Input pipe diameter | G1 |
Serial number of the pump | RX |
Country of Origin | Italy |
PumpType | multi-stage |
Drive Type | electric |
Installation Type | horizontal |
Type of configuration | with engine |
Weight, kg | 9,5 |
Description Speroni RX 2-4 multistage horizontal centrifugal pump
Horizontal multistage stainless steel pumps of the Speroni RSX/RSXM series have a design in which several impellers sequentially mounted one after another in a stainless steel casing, increase pressure from stage to stage. Pumps for the liquid transferring are capable to create the high pressure in water supply systems with relatively low electrical energy consumption. Pumps have good hydraulic characteristics and high capacity. Due to the low noise level during operation and excellent characteristics, the pumps are used in automatic domestic pressure boosting installations, water treatment systems, irrigation in agriculture and other industrial installations. The maximal working pressure is 10 bars. Liquid temperature up to 90 °C. The ambient temperature is not more than 40 ° C. The maximum suction depth is 7 m. 2-pole electric motor (2850 rpm), insulation class F, protection class IP55. The suction pipe and the engine caliper are made of cast iron. Impellers, diffusers, pump casing, motor shaft made of stainless steel. Mechanical mechanical seal graphite/ceramic.
Help in selection
+38 067 360-71-01
Selection of mechanical seals
+38 095 656-37-57
Pump selection
If you have any questions when placing an order, or need help choosing a product, please contact the specified contacts.