Peristaltic pump BH 65-1 230V
Brand:
ETATRON D.S.Characteristics
Producer:
ETATRON D.S.
Input 4-20 mA:
No
Output service relay:
No
Power supply:
1х220 V, 50 Hz
Power capacity, Wt:
20
Control:
Manual
Pulse input(From Flowmetwer):
No
See all
Documentation
Categories
Favorite
Compare
Products from the same category
Also buy with this product
Exchange or returnWe will return or exchange for another product
Fast shippingWe will pick up and send promptly
Warranty and qualityGuaranteed return of goods within 10 days
On-line payment on the sitePayment is made by bank cards
Features Peristaltic pump BH 65-1 230V
Producer | ETATRON D.S. |
Input 4-20 mA | No |
Output service relay | No |
Power supply | 1х220 V, 50 Hz |
Power capacity, Wt | 20 |
Control | Manual |
Pulse input(From Flowmetwer) | No |
Support for flow sensor | No |
Rate of turn, rpm | 150 |
Hose standard size | 9,6x15,9x28 |
Input foe sensor PH | No |
Mode of operation | Momentary mode |
Material for working hoos | Norprene |
Input for sensor RX | No |
Flow rate, l/h | 65 |
Dosage mode: Continually ON-OFF | So |
Input foe sensor | No |
Pressure, bar | 1.5 |
Dosage mode: proportional PROP | No |
Input for sensor CD | No |
Product regulation 0-100% | So |
Input foe temperature sensor | No |
Input for level sensor reagent | No |
Input mA | No |
Serial number of the pump | BH3-V |
Country of Origin | Italy |
PumpType | dosing peristaltic |
Drive Type | electric |
Availability of spare parts | yes |
Application | acids, chemistry, alkalis, coagulant, antiseptic, liquid powders, solutions |
Analogue for | ASeko, FWT, Seko, Injecta, Emec, AquaViva, Descon trol S |
Weight, kg | 2,1 |
Description Peristaltic pump BH 65-1 230V
BH3 - V is a series of high-performance peristaltic (hose) pumps.
The capacity is adjusted 0-100% using a potentiometer located on the front of the pump (using a plastic screwdriver that is included in the pump delivery package).
The pump body is made of anti-acid plastic (polypropylene), resistant to chemical reagents.
The working part of the Pump (Roller Skates and hose) is protected by a transparent polycarbonate cover.
The pump mechanism includes a working hose, four roller bearings and a ball bearing.
Intake height: 2 m.
Discharge height: 10 m.
Working hose design material: Santoprene®, Norprene®, Silicone, Tygon-LFL.
The pump capacity is 100 L/h with a pressure of 1.5 bar.
Documentation Peristaltic pump BH 65-1 230V
Download instructions, catalog for Peristaltic pump BH 65-1 230V
Peristaltic pump BH 65-1 230V reviews
Help in selection
+38 067 360-71-01
Selection of mechanical seals
+38 095 656-37-57
Pump selection
If you have any questions when placing an order, or need help choosing a product, please contact the specified contacts.