Pneumatic diaphragm pump BOA Q8 PP
Pneumatic diaphragm pump BOA Q8 PP
Pneumatic diaphragm pump BOA Q8 PP
Pneumatic diaphragm pump BOA Q8 PP
Brand:
M pumpsCharacteristics
Producer:
M Pumps
Housing material:
PP
Max. head, m:
70
Feed height, m:
70
Max.air pressure, bar:
7
Flow rate, l/min:
8
Diametr of the product line:
1/4"
See all
Categories
Favorite
Compare
Products from the same category
DP 20 SS/V - Pneumatic Membrane Pump
Pre-order only
$5,298.65
DP 30 SS/V - Pneumatic Membrane Pump
Pre-order only
$8,587.24
Pneumatic diaphragm pump BOA Q20 AISI316
Pre-order only
$1,081.97
MINI005-P-NT-P-Y pneumatic diaphragm pump
Pre-order only
$317.12
RUBY 010P-P-NTPT-F pneumatic diaphragm pump
Pre-order only
$344.65
RUBY 010P-P-NTPT-E pneumatic diaphragm pump
Pre-order only
$344.65
Also buy with this product
Exchange or returnWe will return or exchange for another product
Fast shippingWe will pick up and send promptly
Warranty and qualityGuaranteed return of goods within 10 days
On-line payment on the sitePayment is made by bank cardsFeatures Pneumatic diaphragm pump BOA Q8 PP
Producer | M Pumps |
Housing material | PP |
Max. head, m | 70 |
Feed height, m | 70 |
Max.air pressure, bar | 7 |
Flow rate, l/min | 8 |
Diametr of the product line | 1/4" |
Max.temperature, C | 65 |
Diameter of the pneumatic mainline | 4 mm |
Diaphragm material at water side | PTFE |
Suction capacity (NPSH), m | 9,8 |
Dry suction height, m | 3 |
Country of Origin | Italy |
PumpType | membrane pneumatic |
Drive Type | pneumatic |
Description Pneumatic diaphragm pump BOA Q8 PP
Diaphragm pumps DP, with an innovative system of air separation, the geometry of the pump chambers and valve system, can pump a wide range of corrosive products (concentrated acids, alkalis, solvents, varnishes, adhesives, fluid from the presence of suspended particles up to 10 mm, abrasive products, etc.) with a viscosity of 6,000 to 55,000 SDRs.
Flow of membrane pumps DP is made of such materials as:
- RR: POLYPROPLENE (polypropylene);
- PB: FIBER POLYPROPLENE;
- PVDF: KYNAR (polivinilidendiftorid);
- AL: ALUMINUM (aluminum);
- DD: CAST IRON (iron);
- SC: AISI 316L (stainless steel);
- SS: AISI 316 (stainless steel).
Major work elements (membranes, ball valves, valve seat) are made of:
- S: SANTOPRENE (santopren);
- N: NEOPRENE (neoprene);
- B: BUNA-N (NBR) (butadiene-nitrile rubber);
- E: EPDM (ethylene-propylene rubber);
- T: PTFE (PTFE);
- V: VITON / FKM (Fluoroelastomer).
Pneumatic diaphragm pump BOA Q8 PP reviews
Help in selection
+38 067 360-71-01
Selection of mechanical seals
+38 095 656-37-57
Pump selection
If you have any questions when placing an order, or need help choosing a product, please contact the specified contacts.