Pump with lower water intake AQUATICA 0.75 kW H 52 m
Pump with lower water intake AQUATICA 0.75 kW H 52 m
Pump with lower water intake AQUATICA 0.75 kW H 52 m
Brand:
DONGYINCharacteristics
Producer:
DONGYIN
The diameter of borehole, mm:
from 120
Power supply:
1х220 V, 50 Hz
Maximal altitude of immersion under the water surface, m:
до 50
Max. head, m:
71
Feed height, m:
71
Power capacity, kW:
0,75
See all
Favorite
Compare
Products from the same category
Pump with lower water intake 0.37kVt H 42 (30) m Q 55 (33) liters / min Ø100mm + float DONGYIN (777352)
Pre-order only
$131.87
Pump with lower water intake 0.55kVt H 57 (40) m Q 55 (33) liters / min Ø100mm + float DONGYIN (777353)
Pre-order only
$148.04
Pump with lower water intake 0.55kVt H 36 (27) m Q 100 (66) L / min Ø100mm + float DONGYIN (777363)
Pre-order only
$138.53
Pump with lower water intake 0.75kVt H 53 (39) m Q 100 (66) L / min Ø100mm + float DONGYIN (777364)
Pre-order only
$156.95
Pump with lower water intake 1.1kVt H 92 (65) m Q 55 (33) liters / min Ø100mm + float DONGYIN (777355)
Pre-order only
$185.53
Submersible borehole pump 4 inch ATEX ID BETA EX 13, 380V for hydrocarbons
Pre-order only
$8,290.76
Also buy with this product
Exchange or returnWe will return or exchange for another product
Fast shippingWe will pick up and send promptly
Warranty and qualityGuaranteed return of goods within 10 days
On-line payment on the sitePayment is made by bank cardsFeatures Pump with lower water intake AQUATICA 0.75 kW H 52 m
Producer | DONGYIN |
The diameter of borehole, mm | from 120 |
Power supply | 1х220 V, 50 Hz |
Maximal altitude of immersion under the water surface, m | до 50 |
Max. head, m | 71 |
Feed height, m | 71 |
Power capacity, kW | 0,75 |
The type of motor | Асинхронный, маслонаполненный, со встроенной в обмотку термозащитой |
Pump capacity, cu.m/hour | 3.3 |
Max.flow rate, m3/h | 3.3 |
Max.medium temperature, Celsius degree | 35 |
Country of Origin | China |
Availability of spare parts | yes |
Application | well |
Description Pump with lower water intake AQUATICA 0.75 kW H 52 m
Pump with the lower water wall 0.75kVt H 71 (52) 55 Q m (33) n / m + Ø100mm float DONGYIN (777,354) for pumping clean water and can be used: for domestic use in water supply of wells and reservoirs, for pumping water a reservoir for irrigation systems for automatic feeding of water together with small reservoirs using automatic control (control switch, pressure controllers). Pumps with the lower water wall are designed so that the pumped liquid passes between the motor stator and an outer pump housing, so there is an intensive cooling of the engine, allowing it to operate the pumps in wells, reservoirs and open water. SNM series pumps are equipped with float switch, so that your pump will be protected from the "dry run", and the work of the pump can be fully automated with sanitation. The pumping part: - The body of the pumping part: stainless steel AISI 304; - Output
Pump with lower water intake AQUATICA 0.75 kW H 52 m reviews
Help in selection
+38 067 360-71-01
Selection of mechanical seals
+38 095 656-37-57
Pump selection
If you have any questions when placing an order, or need help choosing a product, please contact the specified contacts.