Pump for very hot liquids WILO IPH-O 65/125-1,1/4
Pump for very hot liquids WILO IPH-O 65/125-1,1/4
Brand:
WiloCharacteristics
Output pipe diameter:
DN65
Producer:
Wilo
Power supply:
3х380 V, 50 Hz
Max. head, m:
4.5
Feed height, m:
4.5
Power capacity, kW:
1,1
Pump capacity, cu.m/hour:
27
See all
Categories
Favorite
Compare
Products from the same category
Vertical centrifugal pump LPP40-13-0.75/2, 380V 0.75 kW Hmax 17m Qmax 275l/min Leo3.0
In stock
$828.48
Pump for very hot liquids WILO IPH-O 65/110-2,2/2
Pre-order only
$5,651.05
Vertical centrifugal pump LPP40-17.5-1.1/2, 380V 1.1 kW Hmax 21m Qmax 350L/min Leo3.0
In stock
$914.05
Pump for very hot liquids WILO IPH-O 65/125-2,2/2
Pre-order only
$5,651.05
Vertical centrifugal pump LPP40-20.5-2.2/2, 380V 2.2 kW Hmax 24.5 m Qmax 583l/min Leo3.0
Pre-order only
$1,229.01
Pump for very hot liquids WILO IPH-O 65/140-1,1/4
Pre-order only
$5,494.05
Also buy with this product
Exchange or returnWe will return or exchange for another product
Fast shippingWe will pick up and send promptly
Warranty and qualityGuaranteed return of goods within 10 days
On-line payment on the sitePayment is made by bank cardsFeatures Pump for very hot liquids WILO IPH-O 65/125-1,1/4
Output pipe diameter | DN65 |
Producer | Wilo |
Power supply | 3х380 V, 50 Hz |
Max. head, m | 4.5 |
Feed height, m | 4.5 |
Power capacity, kW | 1,1 |
Pump capacity, cu.m/hour | 27 |
Max.flow rate, m3/h | 27 |
Nom.pressure, Mpa | 0,9 |
Max.temperature, C | 350 |
Material of flow channel | cast iron |
Input pipe diameter | DN65 |
Serial number of the pump | IPH-O |
Country of Origin | Germany |
PumpType | in-line |
Drive Type | electric |
Installation Type | horizontal |
Type of configuration | with engine |
Application | superheated water, thermal oils |
Description Pump for very hot liquids WILO IPH-O 65/125-1,1/4
Single-stage centrifugal pump WILO IPH with dry rotor in-line type for operation with very hot liquids. Three-phase electric motor with one-piece shaft and special lantern for housing with cooling fins for mechanical seal. This series is designed for installation in pipes with a horizontal shaft of the pump motor. IPH-O for temperatures up to 350 degrees IPH-W for temperatures up to 210 degrees
Pump for very hot liquids WILO IPH-O 65/125-1,1/4 reviews
Help in selection
+38 067 360-71-01
Selection of mechanical seals
+38 095 656-37-57
Pump selection
If you have any questions when placing an order, or need help choosing a product, please contact the specified contacts.