JL 80 pump for heating system
JL 80 pump for heating system
JL 80 pump for heating system
JL 80 pump for heating system
JL 80 pump for heating system
Brand:
BTS EngineeringCharacteristics
Output pipe diameter:
DN80
Producer:
BTS Engineering
Power supply:
3х380 V, 50 Hz
Max. head, m:
20
Feed height, m:
20
Power capacity, kW:
3,7
Pump capacity, cu.m/hour:
70
See all
Documentation
Favorite
Compare
Products from the same category
Circulation pump in-line WILO IPL 65/130-3/2
Pre-order only
$1,311.82
JL 32T Centrifugal pump
Pre-order only
$347.73
JL 40T Centrifugal pump
Pre-order only
$408.38
JL 100 S Centrifugal pump
In stock
$1,168.02
JL 100 L Centrifugal pump
In stock
$1,313.32
Pump for very hot liquids WILO IPH-W 65/140-4/2
Pre-order only
$6,162.43
Also buy with this product
Exchange or returnWe will return or exchange for another product
Fast shippingWe will pick up and send promptly
Warranty and qualityGuaranteed return of goods within 10 days
On-line payment on the sitePayment is made by bank cardsFeatures JL 80 pump for heating system
Output pipe diameter | DN80 |
Producer | BTS Engineering |
Power supply | 3х380 V, 50 Hz |
Max. head, m | 20 |
Feed height, m | 20 |
Power capacity, kW | 3,7 |
Pump capacity, cu.m/hour | 70 |
Max.flow rate, m3/h | 70 |
Nom.pressure, Mpa | 1,6 |
Max.temperature, C | 120 |
Material of flow channel | cast iron |
Input pipe diameter | DN80 |
Material | cast iron |
Serial number of the pump | JL |
Country of Origin | China |
PumpType | in-line |
Drive Type | electric |
Installation Type | vertical |
Availability of spare parts | yes |
Warranty, months | 12 |
Application | coolant, hot water supply, hot water supply, ethylene glycol, water supply, cooling, air conditioning systems, glycol, circulation, drying, glaze, cooling towers, ice water, drying chamber, heating, recycling water supply, boiler, water, hot water, pressure increase, water supply |
Analogue for | SPRUT 1V, DAB DCM-G, DAB CP, DAB CP-G, DAB DCP, DAB DCP-G, Grundfos UPS, EBARA EGO EASY, EBARA LPS, WILO VeroLine-IPL, WILO CronoLine-IL-E, WILO TOP-S, Speroni SCR, SPRUT GPD, SPRUT 3VP, PSPRUT 3VP, DAB CM-G, CALPEDA NM, KSB Etaline, CALPEDA NR, CALPEDA NC, KSB Etaline-R, KSB Etanorm, KSB Calio S, KSB Calio, DAB DCM, DAB CM, DAB DKLP, DAB DKLM, DAB ALM, DAB ALP, DAB KLM, DAB KLP |
Description JL 80 pump for heating system
Flange-type centrifugal pumps are applied in sealed and open vented heating systems with forced coolant circulation.
Medium doesn’t come in contact with the pump motor in comparison to the pumps with wet rotor. Inlet and discharge pipes of JL centrifugal pumps are parallel to each other with the similar nominal bores. The JL pumps are equipped with standard flange-type electric air-cooled motors.
Documentation JL 80 pump for heating system
Download instructions, catalog for JL 80 pump for heating system
JL 80 pump for heating system reviews
Help in selection
+38 067 360-71-01
Selection of mechanical seals
+38 095 656-37-57
Pump selection
If you have any questions when placing an order, or need help choosing a product, please contact the specified contacts.