Drainage pump Unilift AP12.50.11.1 made of stainless steel
Brand:
GRUNDFOSCharacteristics
Producer:
GRUNDFOS
Impeller material:
AISI 304 stainless steel
Power supply:
1х220 V, 50 Hz
Maximal altitude of immersion under the water surface, m:
10
Max. head, m:
17
Rate of turn, rpm:
2 760
Feed height, m:
17
See all
Categories
Favorite
Compare
Products from the same category
Also buy with this product
Exchange or returnWe will return or exchange for another product
Fast shippingWe will pick up and send promptly
Warranty and qualityGuaranteed return of goods within 10 days
On-line payment on the sitePayment is made by bank cards
Features Drainage pump Unilift AP12.50.11.1 made of stainless steel
Producer | GRUNDFOS |
Impeller material | AISI 304 stainless steel |
Power supply | 1х220 V, 50 Hz |
Maximal altitude of immersion under the water surface, m | 10 |
Max. head, m | 17 |
Rate of turn, rpm | 2 760 |
Feed height, m | 17 |
Power capacity, kW | 1,1 |
Protection | IP68 |
Pump capacity, cu.m/hour | 33 |
Max.flow rate, m3/h | 33 |
The diameter of loaded solid particles, mm | 12 |
Max.temperature, C | 55 |
Cabel length,m | 10 |
Material of flow channel | AISI 304 stainless steel |
Material | AISI 304 stainless steel |
Country of Origin | Denmark |
PumpType | submersible drainage and fecal |
Drive Type | electric |
Weight, kg | 15,7 |
Description Drainage pump Unilift AP12.50.11.1 made of stainless steel
GRUNDFOS UNILIFT AP12 is a submersible drainage pump. Vertical single-stage stainless steel submersible pump with vertical discharge nozzle and submersible 1-phase electric motor, with built-in thermal protection, insulation class F. The pump is equipped with a filter in the base and a float switch for automatic on and off. The impeller is half open. Pump for pumping domestic and industrial wastewater, rainwater, in the presence of solid particles up to 12 mm in size. The pump has a double sealing system with an mechanical end seal and an oil seal chamber with non-toxic oil. The pump has a vertical discharge nozzle, a casing for cooling the electric motor, which is constantly washed with the working fluid. Rolling bearings with long-term lubrication do not require maintenance. The pump is ready to install, equipped with a carrying handle and supplied with a 10m power cable. A power cable with a plug electrical connector and sealed wire contacts to prevent moisture from entering the stator windings.
Drainage pump Unilift AP12.50.11.1 made of stainless steel reviews
Help in selection
+38 067 360-71-01
Selection of mechanical seals
+38 095 656-37-57
Pump selection
If you have any questions when placing an order, or need help choosing a product, please contact the specified contacts.