Grundfos Unilift AP12.50.11.A1 stainless steel drainage pump
Brand:
GRUNDFOSCharacteristics
Output pipe diameter:
G2
Producer:
GRUNDFOS
Impeller material:
AISI 304 stainless steel
Power supply:
1х220 V, 50 Hz
Max. head, m:
16
Feed height, m:
16
Pump capacity, cu.m/hour:
32
See all
Categories
Favorite
Compare

Products from the same category
Also buy with this product




Features Grundfos Unilift AP12.50.11.A1 stainless steel drainage pump
Output pipe diameter | G2 |
Producer | GRUNDFOS |
Impeller material | AISI 304 stainless steel |
Power supply | 1х220 V, 50 Hz |
Max. head, m | 16 |
Feed height, m | 16 |
Pump capacity, cu.m/hour | 32 |
Max.flow rate, m3/h | 32 |
Max.temperature, C | 50 |
Material of flow channel | AISI 304 stainless steel |
Country of Origin | Denmark |
PumpType | submersible drainage and fecal |
Drive Type | electric |
Description Grundfos Unilift AP12.50.11.A1 stainless steel drainage pump
GRUNDFOS Unilift AP12.50.11.A1 submersible drainage pump. Vertical single-stage stainless steel submersible pump with vertical discharge nozzle and submersible 1-phase electric motor, with integrated thermal protection, insulation class F. The pump is equipped with a filter in the base and a float switch for automatic switching on and off. The impeller is semi-open. Pump for pumping domestic and industrial wastewater, rainwater, in the presence of solid particles up to 12 mm in size. The pump has a double sealing system with a mechanical seal and an oil seal chamber with non-toxic oil. The pump has a vertical discharge pipe and a motor cooling casing, which is constantly washed by the working fluid. Rolling bearings with long-term lubrication are maintenance-free. The pump is ready for installation, has a carrying handle and is supplied with a 5 m power cable. The power cable has a plug-in electrical connector and covered wire contacts to prevent moisture from entering the stator windings.
Grundfos Unilift AP12.50.11.A1 stainless steel drainage pump reviews

Help in selection
+38 067 360-71-01
Selection of mechanical seals
+38 095 656-37-57
Pump selection
If you have any questions when placing an order, or need help choosing a product, please contact the specified contacts.