Drainage submersible pump BE 80 316 DERBY 75, 220V
Brand:
OFT PumpsCharacteristics
Output pipe diameter:
2"
Producer:
OFT Pumps
Impeller material:
AISI 316 stainless steel
Power supply:
1х220 V, 50 Hz
Max. head, m:
9.5
Rate of turn, rpm:
2 850
Feed height, m:
9.5
See all
Documentation
Favorite
Compare
Products from the same category
Also buy with this product
Exchange or returnWe will return or exchange for another product
Fast shippingWe will pick up and send promptly
Warranty and qualityGuaranteed return of goods within 10 days
On-line payment on the sitePayment is made by bank cards
Features Drainage submersible pump BE 80 316 DERBY 75, 220V
Output pipe diameter | 2" |
Producer | OFT Pumps |
Impeller material | AISI 316 stainless steel |
Power supply | 1х220 V, 50 Hz |
Max. head, m | 9.5 |
Rate of turn, rpm | 2 850 |
Feed height, m | 9.5 |
Dimensions, mm | 455x250 |
Motor capacitor capacity, µF | 20 |
Power capacity, kW | 0,55 |
Protection | IP68 |
Pump capacity, cu.m/hour | 30 |
Explosion protection | No |
Seal | VITON |
Max.flow rate, m3/h | 30 |
Max.temperature, C | 80 |
Shaft material | AISI 316 stainless steel |
Cabel length,m | 5 |
Material | AISI 316 stainless steel |
Serial number of the pump | BE 80 DERBY |
Country of Origin | Italy |
PumpType | submersible drainage and fecal |
Drive Type | electric |
Installation Type | vertical |
Warranty, months | 12 |
Weight, kg | 17,5 |
Description Drainage submersible pump BE 80 316 DERBY 75, 220V
Applications of the OFT Pumps BE 80 316 DERBY series: pumping contaminated liquid, collecting leachate, lifting liquid from wells and tanks contaminated even with hydrocarbons and sewage, pumping condensate wells, pumping contaminated wastewater. The pumps must not be installed in potentially explosive atmospheres.
Features: open impeller made of AISI 316 SS stainless steel to avoid clogging with liquid, landfill leachate and other small solids. The seal is made of fluorine rubber (Viton). The motor shaft and housing are made of AISI 316 stainless steel. Electric pumps are produced with a 5 m long ID 4G1.5 electric cable included.
Motor: 2-pole asynchronous motor, 50 Hz, 2850 rpm. Insulation class F. Protection IP68. The motor is cooled by a non-toxic, environmentally friendly liquid. The motor is protected by thermal switches resistant to temperatures up to 80°C.
Operating conditions: The pump must not be run dry. The pump casing must always be completely immersed in the liquid. The temperature of the pumped liquid should be at least 0°C and maximum 80°C. Vertical operating position. Maximum number of starts per hour: 20.
Accessories: control panel, level controller, BE electronic level sensor, ID 4G1, 5 round cable.
Documentation Drainage submersible pump BE 80 316 DERBY 75, 220V
Download instructions, catalog for Drainage submersible pump BE 80 316 DERBY 75, 220V
Drainage submersible pump BE 80 316 DERBY 75, 220V reviews
Help in selection
+38 067 360-71-01
Selection of mechanical seals
+38 095 656-37-57
Pump selection
If you have any questions when placing an order, or need help choosing a product, please contact the specified contacts.