Pentax DTRT 750 submersible drainage and fecal pump for wastewater
Brand:
PentaxCharacteristics
Output pipe diameter:
DN65
Producer:
Pentax
Nom.head, m:
36.1
Power supply:
3х380 V, 50 Hz
Feed height, m:
36.1
Nom.flow rate, m3/h:
18
Cutter bar:
yes
See all
Favorite
Compare
Products from the same category
Also buy with this product
Exchange or returnWe will return or exchange for another product
Fast shippingWe will pick up and send promptly
Warranty and qualityGuaranteed return of goods within 10 days
On-line payment on the sitePayment is made by bank cards
Features Pentax DTRT 750 submersible drainage and fecal pump for wastewater
Output pipe diameter | DN65 |
Producer | Pentax |
Nom.head, m | 36.1 |
Power supply | 3х380 V, 50 Hz |
Feed height, m | 36.1 |
Nom.flow rate, m3/h | 18 |
Cutter bar | yes |
Power capacity, kW | 5,5 |
Pump capacity, cu.m/hour | 18 |
Country of Origin | Italy |
Application | sewers, septic tank, waste disposal, treatment facilities, KNS |
Weight, kg | 94 |
Description Pentax DTRT 750 submersible drainage and fecal pump for wastewater
The Pentax DTRT series drainage and fecal centrifugal pump guarantees a high value of the head height. The shredder system allows pumping wastewater containing textile or filamentous fiber, industrial, urban and zootechnical wastewater, where crushing of suspended solids is required; both a mobile version and a version for a stationary installation with a connecting support are available. Design features: cast-iron pump housing with an outlet threaded hole; cast-iron open-type impeller; oil barrier double seal, (on the engine side – graphite ceramic, on the pump side – silicon carbide); on the hydraulic side, the pump shaft is made of high-quality stainless steel AISI 304. Bearings from well-known world manufacturers. The temperature range of the pumped media is (0) – (+40 °C). PENTAX pumps of the DTR-DTRT series are equipped with 10 meters of NO7 RNF type cable; in single-phase models, it is mandatory to use a control unit equipped with a starting capacitor (for version 2 HP - 50 µF; for version 1.5 HP — 35 µF). Continuous motor, two-pole, asynchronous electric motor in the oil chamber; the permissible voltage deviation rate in the power supply is 6%, provided the asymmetry between phases is not more than 5%; the number of engine starts per hour is max 10 (at uniform time intervals). Alternative voltage and frequency indicators, as well as special sealing seals for working with specific fluids, are available on request.
Pentax DTRT 750 submersible drainage and fecal pump for wastewater reviews
Help in selection
+38 067 360-71-01
Selection of mechanical seals
+38 095 656-37-57
Pump selection
If you have any questions when placing an order, or need help choosing a product, please contact the specified contacts.