Dreno BIC 50-2/110 T submersible pump with two-channel impeller
Brand:
DrenoCharacteristics
Output pipe diameter:
G2
Producer:
Dreno
Housing material:
Сast iron
Impeller material:
cast iron
Power supply:
3х380 V, 50 Hz
Maximal altitude of immersion under the water surface, m:
20
Max. head, m:
13
See all
Documentation
Favorite
Compare
Products from the same category
Also buy with this product
Exchange or returnWe will return or exchange for another product
Fast shippingWe will pick up and send promptly
Warranty and qualityGuaranteed return of goods within 10 days
On-line payment on the sitePayment is made by bank cards
Features Dreno BIC 50-2/110 T submersible pump with two-channel impeller
Output pipe diameter | G2 |
Producer | Dreno |
Housing material | Сast iron |
Impeller material | cast iron |
Power supply | 3х380 V, 50 Hz |
Maximal altitude of immersion under the water surface, m | 20 |
Max. head, m | 13 |
Rate of turn, rpm | 2 850 |
Feed height, m | 13 |
Power capacity, kW | 1,1 |
Protection | IP68 |
Max.diameter of solid inclusions, mm | 20 |
Pump capacity, cu.m/hour | 28.8 |
Explosion protection | No |
Seal | Mechanical Seal, SIC/CER/VITON |
Max.flow rate, m3/h | 28.8 |
Max.temperature, C | 40 |
Shaft material | AISI 420 |
Material | cast iron |
Serial number of the pump | BIC |
Country of Origin | Italy |
PumpType | submersible drainage and fecal |
Drive Type | electric |
Installation Type | vertical |
Weight, kg | 21 |
Description Dreno BIC 50-2/110 T submersible pump with two-channel impeller
Pump application: the BIC series is used for pumping clean water or light wastewater. The high hydraulic performance makes this series particularly suitable for pumping rainwater, surface water, ground water, lakes and rivers.
Feature: the main components are made of GG20 cast iron in the standard configuration, a cuff seal is installed on the engine side, and a mechanical seal on the impeller side is also available on request in the new " EVO " version with a double mechanical seal at the rear located in the oil chamber.
Motor range: 2-pole short-circuited rotor motor; thermal protection integrated in the winding; only for BIC PRO and AM-at 50/2/110, thermal protection T1 and T2 integrated in the motor winding (connected to the three-pole Contactor on the control panel); insulation Class F 155°; motor protection class IP68.
Engine cooling: the engine is cooled by the liquid in which the pump is immersed.
Limits of use: maximum permissible liquid temperature: 40°C when the pump is fully submerged; on request, special version (except ATEX); for BIC PRO and am-at 50/2/110 withstand liquid temperatures up to 60 ° C when the pump is fully connected, maintenance-free S1; maximum immersion depth: 20 m; permissible pH value: 6-10; hydraulic characteristics suitable for liquids with a density <1.1 kg / DM3; permissible voltage: 220v/380V ±5%; permissible frequency: 50 Hz ±2%.
Symbols:
G-float
M-1 Phase 220V
T-3 phase 380V
M / G-single-phase with float sensor
T/G-three-phase with float sensor
EX-in explosion-proof design
2850 rpm./ min. - 2 poles 50 Hz
Vertical pressure pipe
Documentation Dreno BIC 50-2/110 T submersible pump with two-channel impeller
Download instructions, catalog for Dreno BIC 50-2/110 T submersible pump with two-channel impeller
Dreno BIC 50-2/110 T submersible pump with two-channel impeller reviews
Help in selection
+38 067 360-71-01
Selection of mechanical seals
+38 095 656-37-57
Pump selection
If you have any questions when placing an order, or need help choosing a product, please contact the specified contacts.