Submersible pump Dreno COMPATTA 1, M/G with Vortex impeller
Brand:
DrenoCharacteristics
Output pipe diameter:
G1 1/4
Producer:
Dreno
Housing material:
Сast iron
Impeller material:
cast iron
Power supply:
1х220 V, 50 Hz
Maximal altitude of immersion under the water surface, m:
20
Max. head, m:
5.8
See all
Documentation
Favorite
Compare
Products from the same category
Also buy with this product
Exchange or returnWe will return or exchange for another product
Fast shippingWe will pick up and send promptly
Warranty and qualityGuaranteed return of goods within 10 days
On-line payment on the sitePayment is made by bank cards
Features Submersible pump Dreno COMPATTA 1, M/G with Vortex impeller
Output pipe diameter | G1 1/4 |
Producer | Dreno |
Housing material | Сast iron |
Impeller material | cast iron |
Power supply | 1х220 V, 50 Hz |
Maximal altitude of immersion under the water surface, m | 20 |
Max. head, m | 5.8 |
Rate of turn, rpm | 2 850 |
Feed height, m | 5.8 |
Motor capacitor capacity, µF | 7,5 |
Power capacity, kW | 0,28 |
Protection | IP68 |
Max.diameter of solid inclusions, mm | 30 |
Impeller type | vortex impeller |
Pump capacity, cu.m/hour | 9 |
Explosion protection | No |
Max.flow rate, m3/h | 9 |
Max.temperature, C | 40 |
Shaft material | AISI 420 |
Serial number of the pump | COMPATTA |
Country of Origin | Italy |
PumpType | submersible drainage and fecal |
Drive Type | electric |
Installation Type | vertical |
Weight, kg | 11 |
Description Submersible pump Dreno COMPATTA 1, M/G with Vortex impeller
Pump application: The Compatta series is ideal for pumping domestic wastewater due to its small size and mechanical characteristics.
Feature: the main components are made of GG20 cast iron in the standard configuration, a cuff seal is installed on the engine side, and a mechanical seal on the impeller side is also available on request in the new " EVO " version with a double mechanical seal at the rear located in the oil chamber.
Motor range: 2-pole short-circuited rotor motor; thermal protection integrated in the winding; insulation Class F 155°C; motor protection class IP68.
Engine cooling: engine cooling is provided by the liquid in which the pump is immersed.
Limits of use: maximum permissible liquid temperature: 40°C when the pump is fully submerged; maximum immersion depth: 20 m; permissible pH value: 6-10; hydraulic characteristics suitable for liquids with a density <1.1 kg / DM3; permissible voltage: 220v / 380V ±5%; permissible frequency: 50 Hz ±2%.
Symbols:
G - float
M-1 Phase 220V
T-3 phase 380V
M/G-single-phase with float sensor
T/G-three-phase with float sensor
2850 rpm./ min. - 2 poles 50 Hz
Horizontal pressure pipe (except Compatta 1-1, 5 with vertical pressure pipe)
Documentation Submersible pump Dreno COMPATTA 1, M/G with Vortex impeller
Download instructions, catalog for Submersible pump Dreno COMPATTA 1, M/G with Vortex impeller
Submersible pump Dreno COMPATTA 1, M/G with Vortex impeller reviews
Help in selection
+38 067 360-71-01
Selection of mechanical seals
+38 095 656-37-57
Pump selection
If you have any questions when placing an order, or need help choosing a product, please contact the specified contacts.