Submersible pump Dreno GRIX 32-2/110 M with chopper
Brand:
DrenoCharacteristics
Output pipe diameter:
G1 1/4
Producer:
Dreno
Housing material:
Сast iron
Impeller material:
cast iron
Power supply:
1х220 V, 50 Hz
Maximal altitude of immersion under the water surface, m:
20
Max. head, m:
25
See all
Documentation
Favorite
Compare
Products from the same category
Also buy with this product
Exchange or returnWe will return or exchange for another product
Fast shippingWe will pick up and send promptly
Warranty and qualityGuaranteed return of goods within 10 days
On-line payment on the sitePayment is made by bank cards
Features Submersible pump Dreno GRIX 32-2/110 M with chopper
Output pipe diameter | G1 1/4 |
Producer | Dreno |
Housing material | Сast iron |
Impeller material | cast iron |
Power supply | 1х220 V, 50 Hz |
Maximal altitude of immersion under the water surface, m | 20 |
Max. head, m | 25 |
Rate of turn, rpm | 2 850 |
Feed height, m | 25 |
Power capacity, kW | 1,1 |
Protection | IP68 |
Impeller type | с измельчителем |
Pump capacity, cu.m/hour | 10.8 |
Explosion protection | No |
Seal | Mechanical Seal, SIC/CER/VITON |
Max.flow rate, m3/h | 10.8 |
Max.temperature, C | 40 |
Shaft material | AISI 420 |
Serial number of the pump | GRIX |
Country of Origin | Italy |
PumpType | submersible drainage and fecal |
Drive Type | electric |
Installation Type | vertical |
Weight, kg | 25 |
Description Submersible pump Dreno GRIX 32-2/110 M with chopper
Pump application: Grix series submersible pumps have a built-in macerator at the inlet. This destroys solid particles in wastewater, which allows them to be transported through relatively narrow, often existing pipes. Areas of application: domestic wastewater, liquids with suspended solids, when high pressure (Hm) is required.
Feature: The main components are made of cast iron GG20 configuration has a sleeve seal mounted on the engine side, and a mechanical seal in the oil chamber on the impeller side.
Range of motors: motor with a short-circuited rotor in execution with 2 poles; tThermal protection built into the winding; insulation class F 155 ° C; degree of protection of the IP68 engine.
Engine cooling: engine cooling is provided by the liquid in which the pump is immersed.
Limits of use: maximum permissible liquid temperature: 40 ° C with the pump completely submerged; maximum depth of immersion: 20 m; permissible pH value: 6-10; hydraulic characteristics suitable for liquids with a density of <1.1 kg / dm3; permissible voltage: 220V / 380V ± 5%; permissible frequency: 50 Hz ± 2%.
Symbols:
G-float
M-1 Phase 220V
T-3 phase 380V
M/G-single-phase with float sensor
T/G-three-phase with float sensor
2850 rpm./ min. - 2 poles 50 Hz
Horizontal pressure pipe
Documentation Submersible pump Dreno GRIX 32-2/110 M with chopper
Download instructions, catalog for Submersible pump Dreno GRIX 32-2/110 M with chopper
Submersible pump Dreno GRIX 32-2/110 M with chopper reviews
Help in selection
+38 067 360-71-01
Selection of mechanical seals
+38 095 656-37-57
Pump selection
If you have any questions when placing an order, or need help choosing a product, please contact the specified contacts.