Vacuum pump DEKKER Maxima-C DV3001C-CL
Brand:
DEKKERCharacteristics
Output pipe diameter:
150
Producer:
DEKKER
Pressure:
Max 1.2 Kg/Cm2
Vacuum, mm Hg:
640 mm Hg with Seal Water 20C
Pump capacity, cu.m/hour:
5600
Explosion protection:
No
Max.flow rate, m3/h:
5600
See all
Documentation
Categories
Favorite
Compare
Products from the same category
Also buy with this product
Exchange or returnWe will return or exchange for another product
Fast shippingWe will pick up and send promptly
Warranty and qualityGuaranteed return of goods within 10 days
On-line payment on the sitePayment is made by bank cards
Features Vacuum pump DEKKER Maxima-C DV3001C-CL
Output pipe diameter | 150 |
Producer | DEKKER |
Pressure | Max 1.2 Kg/Cm2 |
Vacuum, mm Hg | 640 mm Hg with Seal Water 20C |
Pump capacity, cu.m/hour | 5600 |
Explosion protection | No |
Max.flow rate, m3/h | 5600 |
Input pipe diameter | 200 |
Material | cast iron |
Serial number of the pump | Maxima-C |
Country of Origin | USA |
PumpType | vacuum |
Drive Type | electric |
Installation Type | horizontal |
Application | metallurgy, energy, paper industry, food industry |
Description Vacuum pump DEKKER Maxima-C DV3001C-CL
DEKKER water ring vacuum pumps are used for a wide range of industrial operations, such as drying, distillation, impregnation, ventilation, sterilization, degassing, etc. The pumps are manufactured using premium materials and high-quality components using the most advanced technologies as per industry norms, thus offering superior performance and durability. The pumps offer economic and energy-efficient operation. They are also easy to install and maintain. Do not create too much noise and vibration.
The Maxima-C is a robust design, which features conical porting instead of flat plate porting offered on the Maxima-K. The cones are attached to the end housing of the pump and protrude into the impeller on both sides. Air enters the impeller in a radial direction versus axially when compared to the flat plate design. The primary benefit of this design is its ability to handle more seal liquid or liquid carryover through the suction compared to the flat plate design with less effect on power consumption and better performance when handling saturated inlet gas. The Maxima-C features a shrouded rotor and heavy-duty cones and bearings. Packed gland sealing is standard with optional mechanical seals available. Other features include removable bearing brackets, multiple inlet/discharge port configurations and a casing partition allowing for different operating pressures at each inlet port. The Maxima-C pumps are available in capacities ranging from 700 to 22,000 ACFM, multiple material configurations and are manufactured to ISO 9001:2015 quality standards. Selection of Maxima-C versus Maxima-K depends on operating conditions and the most efficient operating point.
Documentation Vacuum pump DEKKER Maxima-C DV3001C-CL
Download instructions, catalog for Vacuum pump DEKKER Maxima-C DV3001C-CL
Vacuum pump DEKKER Maxima-C DV3001C-CL reviews
Help in selection
+38 067 360-71-01
Selection of mechanical seals
+38 095 656-37-57
Pump selection
If you have any questions when placing an order, or need help choosing a product, please contact the specified contacts.