DN150 Pneumatic control valve 10T11Y-DNx15040Z-L112C-C (cast iron body, SS304 trim) with YT-1000 positioner, input 4-20mA
Brand:
BTS EngineeringCharacteristics
Producer:
BTS Engineering
Housing material:
Сast iron
Control signal, mA:
4-20
Operating temperature:
–17°C +230°C
Explosion protection:
No
Nom.pressure, Mpa:
4
Connection type:
flanged
See all
Documentation
Favorite
Compare
Products from the same category
DN40 Pneumatically actuated control valve 10T11Y-DNx4040Z-L112C-C (body and seat 1.4404/1.4409) with positioner YT-1000, 4-20mA input, Ex
Pre-order only
$7,191.29
DN40 Pneumatically actuated control valve 10T11Y-DNx4040Z-L122C-C (body and seat 1.4404/1.4409) with positioner YT-1000, 4-20mA input, Ex
Pre-order only
$7,191.29
1/2 inch Pneumatically actuated control valve for steam 10Р11Y-1/2-150LB-Z-L112C-C (CF3 body, 316L seat) with YT-1000 positioner, 4-20mA input
Pre-order only
$2,411.80
DN80 Pneumatically actuated deaerator control valve 10P11Y-DNx8016Z-L112C-C (WCB body, SS304 seat) with YT-1000 positioner, 4-20mA input
Pre-order only
$3,854.15
Exchange or returnWe will return or exchange for another product
Fast shippingWe will pick up and send promptly
Warranty and qualityGuaranteed return of goods within 10 days
On-line payment on the sitePayment is made by bank cardsFeatures DN150 Pneumatic control valve 10T11Y-DNx15040Z-L112C-C (cast iron body, SS304 trim) with YT-1000 positioner, input 4-20mA
Producer | BTS Engineering |
Housing material | Сast iron |
Control signal, mA | 4-20 |
Operating temperature | –17°C +230°C |
Explosion protection | No |
Nom.pressure, Mpa | 4 |
Connection type | flanged |
Conditional passage,DN | 150 |
Mode of action | normally closed |
Country of Origin | China |
Working Environment | steam, steam condensate |
Description DN150 Pneumatic control valve 10T11Y-DNx15040Z-L112C-C (cast iron body, SS304 trim) with YT-1000 positioner, input 4-20mA
Control valve with pneumatic drive and actuator, control 4-20 mA shut-off, single-seat, two-way vertical control valve. RA is a linear pneumatic drive of the membrane type. The drive has two versions: DA - direct action, normally open (air pressure closes the valve) and RA - reverse action, normally closed (air pressure opens the valve). A wide range of applications allows this valve to be used with the most common process fluids, such as water, superheated water, steam, air, gases and other non-aggressive liquids.
BASIC PROPERTIES:
Single-seat, two-way, direct or reverse action.
Reinstalling the drive does not require disassembly.
Valves from the pipeline.
Documentation DN150 Pneumatic control valve 10T11Y-DNx15040Z-L112C-C (cast iron body, SS304 trim) with YT-1000 positioner, input 4-20mA
Download instructions, catalog for DN150 Pneumatic control valve 10T11Y-DNx15040Z-L112C-C (cast iron body, SS304 trim) with YT-1000 positioner, input 4-20mA
Video DN150 Pneumatic control valve 10T11Y-DNx15040Z-L112C-C (cast iron body, SS304 trim) with YT-1000 positioner, input 4-20mA
DN150 Pneumatic control valve 10T11Y-DNx15040Z-L112C-C (cast iron body, SS304 trim) with YT-1000 positioner, input 4-20mA reviews
Help in selection
+38 067 360-71-01
Selection of mechanical seals
+38 095 656-37-57
Pump selection
If you have any questions when placing an order, or need help choosing a product, please contact the specified contacts.