Submersible borehole pump M70-251-11,380V
Brand:
OFT PumpsCharacteristics
Output pipe diameter:
DN32
Producer:
OFT Pumps
Power supply:
3х380 V, 50 Hz
Maximal altitude of immersion under the water surface, m:
120
Max. head, m:
104
Rate of turn, rpm:
2 850
Feed height, m:
104
See all
Documentation
Favorite
Compare

Products from the same category
Also buy with this product




Features Submersible borehole pump M70-251-11,380V
Output pipe diameter | DN32 |
Producer | OFT Pumps |
Power supply | 3х380 V, 50 Hz |
Maximal altitude of immersion under the water surface, m | 120 |
Max. head, m | 104 |
Rate of turn, rpm | 2 850 |
Feed height, m | 104 |
Power capacity, kW | 4 |
Protection | IP68 |
Pump capacity, cu.m/hour | 15 |
Seal | VITON |
Max.flow rate, m3/h | 15 |
Max.temperature, C | 70 |
Cabel length,m | 5 |
Height, mm | 1 171 |
Serial number of the pump | M70 |
Country of Origin | Italy |
PumpType | borehole |
Drive Type | electric |
Installation Type | vertical |
Warranty, months | 12 |
Weight, kg | 41,7 |
Description Submersible borehole pump M70-251-11,380V
Pump application: Pumping of leached liquid.
Features: Multistage monoblock electric submersible pumps with a hydraulic part located under the electric motor cooled by the pumped liquid. Electric pumps are available with a 5 m ID 4G1.5 electrical cable included. External pump housing, motor housing, shaft, impellers and stainless steel diffusers. Viton seal. Threaded discharge hole 1 "1/2 from 1.5 kW to 3 kW. Flange discharge pipe PN25 DN32 UNI 6083/67 with a capacity of 4 to 5.5 kW. The pumps are equipped with a filter that should not contain deposits and does not allow the pumping of liquids with solid particles larger than 1 mm.
Motor: 2-pole asynchronous motor, 50 Hz, 2850 rpm. Class F insulation. IP68 protection. Operating voltage: single-phase 220V, three-phase 380V. The electric motor is cooled with a non-toxic, non-polluting liquid.
Operating conditions: the pump cannot operate in dry conditions. The pump housing is immersed in water at half its height. Temperature of the pumped liquid: minimum 0 ° C-maximum 70 ° C. Non-freezing place. Vertical working position (special version for inclined working position on request). Maximum immersion depth: 120 m. Maximum number of launches per hour: 20.
Accessories: control panel, level regulator, BE electronic level sensor, top filter 170, also available with inclined riser for inclined wells, round cable ID 4G1, 5.
Documentation Submersible borehole pump M70-251-11,380V
Download instructions, catalog for Submersible borehole pump M70-251-11,380V
Submersible borehole pump M70-251-11,380V reviews

Help in selection
+38 067 360-71-01
Selection of mechanical seals
+38 095 656-37-57
Pump selection
If you have any questions when placing an order, or need help choosing a product, please contact the specified contacts.